husqvarna 610
husqvarna 610
hello, meybe someone knows husqvarna te 610 2002 engine tuning kits ?
Re: husqvarna 610
Hello
I am a Husaberg specialist and the two engines are very close.
Husabergs are weak on the main bearings, Husky's are weak on the big end. 30mm is small. you can overcome this.
get yourself a Keihin FCR carb from a 2004-2005 KTM or a 426 yamaha 2000-2003. the carb MUST have a seperate belmouth. they come 37-39-41 but can be taken to 43mm by an engineer.
I do an amazing jetting kit
http://www.ebay.co.uk/itm/HUSABERG-KTM- ... 3ab9bfa4cd. it fits anything SOHC and big.
don't take the compression up without making the big end bigger at say 32mm.
there are 'sport' cams but this is all. a sidecar needs torque.
regards
Taffy
Taffmeisters
I am a Husaberg specialist and the two engines are very close.
Husabergs are weak on the main bearings, Husky's are weak on the big end. 30mm is small. you can overcome this.
get yourself a Keihin FCR carb from a 2004-2005 KTM or a 426 yamaha 2000-2003. the carb MUST have a seperate belmouth. they come 37-39-41 but can be taken to 43mm by an engineer.
I do an amazing jetting kit
http://www.ebay.co.uk/itm/HUSABERG-KTM- ... 3ab9bfa4cd. it fits anything SOHC and big.
don't take the compression up without making the big end bigger at say 32mm.
there are 'sport' cams but this is all. a sidecar needs torque.
regards
Taffy
Taffmeisters
I don't want a works bike I just want their address book!
here is a link to the SMCA web site for ya! http://smcagb.moonfruit.com/
here is a link to the SMCA web site for ya! http://smcagb.moonfruit.com/