WANTED; INFORMATION ref zabel

Sidecars, Engines, Parts, Transporters (Only off-road sidecar related items).

Moderators: Rien.nl, Scott

Post Reply
samwatson
Posts: 43
Joined: Fri Feb 19, 2016 8:27 pm

WANTED; INFORMATION ref zabel

Post by samwatson »

I have a zabel 27 4 speed gearbox type. (neutral at bottom)
I haven't had this engine running before, its just been built for me and it runs very well.
but when you pull the hydrolic clutch in it will not go from neutral to first gear.
when engine off the engine selects all gears (not using clutch) very well.
if you start the engine in gear with the clutch in, the bike creeps forward slightly. it rides and selects all gears fine. but when you go to stop, pull clutch in and go down into netural; it will not come back out of netural again (until the engine is turned off and restarted whilst in gear)

the bike if rolling fast enough does sometimes go into netural and then back into gear but only when rolling fast. if stationary it gets stuck in netural.

if you start the bike in netural and click the gear lever up into first without the clutch then the bike jumps forward and stalls like it should; so I know it can go from netural to first gear ok but not when using the clutch.

any help please I need this done asap
when bike is running and in 1st gear with clutch in it does creep forward very slightly......
Post Reply