mountain bike
- Sam Van Tongerloo
- Team SidecarCross.com
- Posts: 106
- Joined: Sun Feb 15, 2004 11:02 pm
- Location: Mortsel, Belgium
- Contact:
i don't know, just have to test certain things i think about weight and suspension and so on. that's part of the fun...
585photo
www.585photo.be
www.585photo.be
HERE is an old BMX sidecar!
John, look, this may help you!
http://bmxmuseum.com/bikes/littlejohn/454/4
U can see the lockers to bike's frame here
And here
http://anthonydomingo.com/hack/
Also, there is a bmx sidehack in online store!
http://www.patriotbicycles.com/Sidehacks.htm
Yeee HAaaa!!
John, look, this may help you!
http://bmxmuseum.com/bikes/littlejohn/454/4
U can see the lockers to bike's frame here
And here
http://anthonydomingo.com/hack/
Also, there is a bmx sidehack in online store!
http://www.patriotbicycles.com/Sidehacks.htm
Yeee HAaaa!!
- John Wolverson
- Active Visitor 100
- Posts: 151
- Joined: Mon Feb 09, 2004 4:05 pm
- Location: West Midlands UK
B.M.X sidecars
Hello Zixel, Those websites for B.M.X sidecars are just brilliant, and will give me quite a number of ideas when I do decide to make a start on my own B.M.X sidecar project.
All the best........Johnny W. UK.
Ps, Where do you come from in Russia?
All the best........Johnny W. UK.
Ps, Where do you come from in Russia?
Here's some stuff from the USA (California), from the 1970's. Several of these guys graduated to sidecar-cross in the early 1980's, including my Dakar passenger Duane McDowell (he's probably in some of these photos). My brothers and I built and rode bicycle sidecars before we raced sidecar-cross. Our first bicycle sidecar was 50% wood! That was around 1970, before BMX really got started.
The photos and website below are from Rick Twomey (Rick's Bike Shop), a good friend of mine.
See the whole photo gallery here:
http://www.rbsteam.com/modules/sidehack/pics.php
And a poster from a 2006 event in California:
The photos and website below are from Rick Twomey (Rick's Bike Shop), a good friend of mine.
See the whole photo gallery here:
http://www.rbsteam.com/modules/sidehack/pics.php
And a poster from a 2006 event in California:
- John Wolverson
- Active Visitor 100
- Posts: 151
- Joined: Mon Feb 09, 2004 4:05 pm
- Location: West Midlands UK
B.M.X sidecarcross
Hello Scott, I didn't realise that B.M.X sidecarcross had been quite this popular back in the 70s in the U.S.A, or if at all. Which of the photographs are you and your brother on, and what was your race number? Marc never had a pushbike sidecar, but he did have many small 50cc and 90cc sidecar outfits. This is Marc aged about 5 or 6 in his very first sidecar race, in about 1965/6.
Bye for now...........Johnny W.
Bye for now...........Johnny W.
Re: B.M.X sidecarcross
None are us. I would have to dig deep to find any photos from those days. Wow, 1965, I can't say I was doing anything back then but shitting my pants! Great photo you have there! I guess you've mastered the headache of scanning and posting photos. Great job!John Wolverson wrote:...Which of the photographs are you and your brother on, and what was your race number?...
OK, Im thinking that making a BMX sidehack is much easyer than making an MTB, becos MTB should have an alluminium frame and is so difficalt to find the moterials and a special welding for alluminium. So making a still sidecar for bmx is much easyer. (Are u gonna make it with sill pipes, right? Or with that chromium molybdenum fusion?)
- John Wolverson
- Active Visitor 100
- Posts: 151
- Joined: Mon Feb 09, 2004 4:05 pm
- Location: West Midlands UK
B.M.X SIDECAR PROJECT.
Hello Zixel, On all of the small sidecar outfits that I ever made for Marc, I never once used high grade tubing. Even on the motocross outfits that I made that Marc and I raced both internationally and nationals, I only ever used seam welded grade "A" tubing, without any real problems. Although I have a tube bender I tend to use tubes off other things, like tubing from tables, chairs, and all types of other things. Office chairs (the type with plastic seats) are quite high grade tubing, if you think about it, they are very hard to bend. The little sidecar that I made for Marc in the photograph, I used office chairs with the powder coating removed for most of the chassis construction, the small chrome handrail was a part of the frame off a glass table. For the rear subframe, I found some tubing with the correct bends that I required in a skip by the side if the road. The sidecar and rear mudguard I made out of an old Kawasaki motocross front mudguard. By doing it this way your project comes out quite cheap to build. If you find at the end of the project that you don't like sidecars, it hasn't cost you anything. I will be doing some drawings shortly, and I will post them on this forum for you.
Regards........Johnny W.
Regards........Johnny W.
Re: B.M.X SIDECAR PROJECT.
Thanx! I just understand a few last sentences. Dont explain with that difficalt english next time =)John Wolverson wrote:Hello Zixel, On all of the small sidecar outfits that I ever made for Marc, I never once used high grade tubing. Even on the motocross outfits that I made that Marc and I raced both internationally and nationals, I only ever used seam welded grade "A" tubing, without any real problems. Although I have a tube bender I tend to use tubes off other things, like tubing from tables, chairs, and all types of other things. Office chairs (the type with plastic seats) are quite high grade tubing, if you think about it, they are very hard to bend. The little sidecar that I made for Marc in the photograph, I used office chairs with the powder coating removed for most of the chassis construction, the small chrome handrail was a part of the frame off a glass table. For the rear subframe, I found some tubing with the correct bends that I required in a skip by the side if the road. The sidecar and rear mudguard I made out of an old Kawasaki motocross front mudguard. By doing it this way your project comes out quite cheap to build. If you find at the end of the project that you don't like sidecars, it hasn't cost you anything. I will be doing some drawings shortly, and I will post them on this forum for you.
Regards........Johnny W.
- John Wolverson
- Active Visitor 100
- Posts: 151
- Joined: Mon Feb 09, 2004 4:05 pm
- Location: West Midlands UK
B.M.X SIDECAR PROJECT.
Hiya Zixel, What part didn't you understand?
Best regards......Johnny W.
Best regards......Johnny W.
Re: B.M.X SIDECAR PROJECT.
I think he likes photos!John Wolverson wrote:Hiya Zixel, What part didn't you understand?
.
.
.
Last edited by Scott on Thu Sep 07, 2006 2:33 pm, edited 1 time in total.
- John Wolverson
- Active Visitor 100
- Posts: 151
- Joined: Mon Feb 09, 2004 4:05 pm
- Location: West Midlands UK
B.M.X SIDECAR PROJECT
Hello Zixel and Scott, This is the main cheap type office chairs that I get the tubing off, But there are many other types. If you go into furniture@work you will see the exact type that I use the most. For Tom's B.M.X sidecar, for the main chassis I intend to use parts of the chrome tubular frame of a lounger, but I will do some photographs as I progress with it.
Best regards...........Johnny W.
But the exact type is on furniture@work
Best regards...........Johnny W.
But the exact type is on furniture@work